Hospital Cleanroom Floor Manufacturer

Airtech provides floor systems that are used in the clean rooms. Two types of floor systems are available, namely the raise type and the stairway type.These floors are also known as access floors. Their main purpose is to create a solid and firm platform above the actual ground inside a building. The space underneath the raised floors can be used to place the cables and wiring’s that are essential to provide network and power functions.

These cables and wiring’s can be hidden neatly and safely away from everyone’s view. Without such flooring systems, much trunking casings needs to be constructed to contain all the cables and wiring which may cause an unsightly look when they are laid crossing all over the places. Even worse, if such cables and wiring’s are laid plainly on the ground, they are prone to accidental tripping which may cause disruption to network and power services to the attached equipment and machines.

These flooring systems are very common in office buildings where there are many computers and equipment which are required to be connected to network and power cabling and wiring. Airtech specializes in flooring systems which fulfills all the technical specifications that are mandatory to a clean room setup. The floors of a clean room must be able to withstand heavy loads as many of the required equipment or machines may be bulky and heavy.

Airtech is able to ensure that the floor panels are manufactured to the highest quality possible such that the required load ratings can be achieved. This is important as any loose and shaking panels or any gaps in between the panels will definitely result in the equipment on top of it to collapse and be severely damaged. Human personnel may even be injured if the poor quality panel that they stepped on suddenly give way and fell down as a result of it.

Other than considering the quality of the floor panels themselves, the installation works as well as the initial conditions of the ground where the panels are supposed to be installed are equally important. Airtech is experienced in installing in all types of scenarios. If the ground contains any debris such as rocks, the floor panels will not be properly installed. As such, the area must be cleared of all debris entirely before installation.

Airtech is able to provide both full panels as well as ventilation panels. The flooring system consists of many panels which are usually two by two feet in dimensions. These panels are removable and any particular panel can be easily removed using a simple tool that have a suction cup on it. This tool is called floor puller, tile lifter or suction lifter. The suction cup sticks onto the panel and locks the tool on it. The panel is then lifted up together with the tool as it is pulled up.

In Order To Find Out More Details Hospital Solutions Please Be Touch With Us Today Onwards..!

Hospital Fire Exit Door Manufacturer

Hospitals are buildings that require utmost safety from disasters that can be vetoed upon, like the occurrence of a fire breakout. Similar to any building, hospitals are also faced with a different type of challenge due to the number of individuals who may not be familiar with the employ of a fire door and are actually not used to the building layout.

This may be a challenge for a lot of hospital buildings, especially that when fire disaster happens, people will definitely panic. It is understandable that some patients have been there for not many days and this situation can cause them shock, so they won’t be able to do what needs to be done. It’s even risky once a fire breaks out since there are patients who are immobile and they should be evacuated to safer areas.

The emergency team of the hospital should determine if evacuation should be vertical or horizontal since there are also fire doors that can block the spread of fire in some areas, so the other part of the building will be safe. Hospital buildings are given higher rating requirement for doors that are fire-proof since there’s a large span to cover for people to get out of any burning area.

It’s also required for laboratory rooms such as the CT scan room, the x-ray room and the MRI room because these places contain equipment that are essential for diagnostics. Hospitals are required to train their staff for emergencies like fire and earthquake. There are drills that can be practiced and there must be regular instruction about fire exits and egress in case a fire breaks out.

The emergency personnel would lead the people on where they should seek safety since they were trained to have knowledge on the right moves to take and are familiar with the building floor plan. One more issue which will put the people in more peril during a fire is the presence of free flowing oxygen from the pipeline. When a valve is open and there’s fire nearby, combustion will be supported well and this will contribute to the growth of combustion in a certain room.

Once the place becomes too hot, the place can explode. Thus, the walling, ceiling and doors, even the windows should be fire-resistant. Evacuation of people and important things may either be horizontal evacuation which means that the other end of the floor can be used as a safe region for evacuees. There has to be a secure area in a certain floor where the fire cannot reach and this may be protected with a highly-rated fire door.

In Order To Find Out More Details Fire Rated Door Please Be Touch With Us Today Onwards..!

Hospital Decontamination Equipments Manufacturer

Airtech Equipment Pte. Ltd. is established in the year 1984, from 2000 a Singapore joint venture between Utopia Aire Pte Ltd and Airtech Japan Ltd incorporated to manufacture unique and high quality Clean room, Bio-safety and Operating Room Equipment’s. Airtech designs and Manufactures the clean room, Bio-safety and Operating Room equipment’s to customers’ requirement and needs which are customized through professional design team for different industries.

Contamination control is the common term generally used in all the activities regarding the control of the existence, growth and proliferation of contamination in certain areas. Contamination control may refer to the atmosphere as well as to surfaces, to particulate matter as well as to microbes and to contamination prevention as well as to decontamination.

The common aim of all activities related to contamination control is to permanently ensure the highest level of cleanliness in controlled environments like clean room. This is accomplished by maintaining, reducing or eradicating viable and non-viable contamination for either sanitary purposes or in order to maintain an efficient rate of production.

Contamination generally poses a significant level of risk to the technical processes, experiments or the production activities, as well as to the individuals who are involved in the process. Unguarded proliferation of contamination can quickly lead to product damage, yield reduction, product recalls and other outcomes highly detrimental to business. The products or equipments in a range of low level industries are recalled due to ineffective contamination control systems.

As a contamination control measure, EPA has approved a long list of antimicrobial copper products “with public health benefits” made from these copper alloys, such as bedrails, handrails, over-bed tables, sinks, faucets, door knobs, toilet hardware, computer keyboards, health club equipment, shopping cart handles, etc.

Copper-alloy surfaces have intrinsic properties which effectively and quickly destroy microbes and they are being installed in healthcare facilities and in a subway transit system as a protective public health measure in addition to regular cleaning. The United States Environmental Protection Agency (EPA) has approved the registration of 355 different antibacterial copper alloys that kill E.coli O157:H7, methicillin-resistant Staphylococcus aureus (MRSA), Staphylococcus, Enterobacter acrogens, and Pseudomonas aeruginosa.

The EPA has determined that when cleaned regularly, these copper alloy surfaces continuously reduce bacterial contamination, achieving 99.9% reduction within two hours of exposure, kill greater than 99.9% of Gram-negative and Gram-positive bacteria within two hours of exposure, Deliver continuous and ongoing antibacterial action, remaining effective in killing more than 99.9% of the bacteria within two hours. Between the time period of routine cleaning and sanitizing steps, stop the growth of bacteria within two hours of exposure.

Cleanrooms maintain particulate-free air through the use of either HEPA or ULPA filters employing laminar or turbulent air flow principles. The laminar air flow systems directs the filtered air to the location of the filters which are located on walls near the cleanroom floor or through raised perforated floor panels to be re-circulated. The Laminar air flow systems are typically employed across 80% of a cleanroom ceiling to maintain constant air processing.

In Order To Find Out More Details Biosafety Level Please Be Touch With Us Today Onwards..!

Hospital Surface Particle Removal Device

Airtech Equipments was established in the year 1984, to manufacture high quality and unique Clean Room, Bio-Safety and Operating Room Equipments. There was a Singapore joint venture between Airtech Japan Ltd and Utopia Aire Pte Ltd in the year 2000. Airtech is an expert in the manufacture of Semiconductors like Pulse Jet Air Shower, Airtech Filter (Ulpa & Hepa), Clean Auto Stocker for Wafer Cassette, Ultra Clean Aluminium Ceiling Grid System, Large Work, Electronic Parts and many more products.

Clean Bench is also manufactured in two types namely Vertical and Horizontal. Other custom made clean roon equipments are Fan Filter, Airtech Lighting Systems, Air Shower, Pass Box, SS Mac, Wall Panel & Floor, Surface Particles Remover Device which is of two types namely Brush Particle Remover and Air Knife Particle Remover. Airtight Doors are used in Medical Sectors (Hospitals) for Operation Theatre, Pharmaceutical Sector, Isolation Rooms, etc.

Hospital Surface Particle Removal Device Features is the Brush hits every surface of box, and removes dust from it. It is suitable also for the thing of hard shape. (Nylon brush) The inside of remover is designed as a negative pressure structure; there is no dispersion of particles to outside. Speed of carrying in (Time of particle removal) can be altered It is possible to synchronize with the transportation line in the back and forth.

All the removed dust is gathered in the tray for easy clean-up Dunbar and the net for catching insect are attached. Air Knife Particle Remover High Speed air blows particles off The inside of remover is a negative pressure structure, there is no dispersion of particles to outside Knife-shape jet air spouted from the slit in four directions Dunbar and the net for catching insect are attached Air curtains are installed at its entrance.

In Order To Find Out More Details Surface Particle Removal Device Please Be Touch With Us Today Onwards..!